While holding the nozzle turret at the right stop, turn the key counterclockwise- Each full turn of the key decreases the arc 90°.Insert the plastic end of the Orbit key into the pattern adjustment socket.When the arc (360°) is reached, the key stop turning or there will be a ratcheting noise.Each full turn of the key increases the arc 90° While holding the nozzle turret at the right stop, turn the key clockwise.Insert the plastic end of the Orbit key (Model 55070) into the pattern adjustment socket (See Figures 2 & 5.).The nozzle turret must be held in this position for all arc adjustments Rotate the nozzle turret clockwise to the right stop.Using the palm of you hand, rotate the nozzle turret counterclockwise to the left stop to complete any interrupted rotation cycle.It is recommended that initial adjustment be made before installation. Sprinklers may be adjusted with water on or off. Voyager Il sprinklers are preset to rotate approximately 180°. Set of 7 low-angle nozzles available (Model 55072, sold separately).Detailed installation instructions inside.Set of 12 interchangeable nozzles included.Comes with pre-installed, Standard #7 nozzle.40°-360° adjustable arc for fast, hassle-free adjustment, wet or dry.Replaces or works with most types of impact or gear drive sprinkler systems including Hunter, Toro Rainbird.
